6 brojeva na inst.tabli

[leon63 0]

model E36 320i coupe iz 1998. godine, kada se pritisne dugme za resetovanje trocifrene kilometraze i da polu kontakt, pojave se sledece cifre:

- 363748 km,

- 00000km,

- 4663 km,

- 15700 km, ovo je broj sasije po saobracajnoj dozvoli,

- 230 km,

- 06 km i

- Na kraju odradi proveru kazaljki i lampica na tabli.

Uz automobil imam i servisnu knjizicu po kojoj je presao onoliko koliko i pise na instrument tabli 101000 km. Posle prve provere sam presao oko 500 km, ali cifre su dalje iste i nijedna neodgovara broju sasije(sem cetvrte) ili motora. Auto sam pri kupovini proverio u SUP-u Nis u odeljenju saobracajne policije ion je potpuno legalan.Veliki pozdrav svim fanovima Bavarske industrije.

[BMW E36 POWER 0]

ma ta prva cifra nema veze sa kolometrazom...evo ponavljam...tetak mi je uzeo e36 iz salona i njemu izlistava skoro 400 000 na onaj prvi...

[gadafi 0]

:kiss3:

NOTE: Just for the hell of it. KLR means ignition switch position #1

(accessory) KL-15 is ignition switch position #2 (on), and KL-50 is ignition

position #3 (start)

This works on all instrument clusters 1992-1999 E36 - 4

door/coupe/convertible/M3.

Step 1. Press and hold the mileage reset button.

Step 2. Put key into ignition switch and turn to KLR (Ignition switch

position #1)

Your LCD display will show something like this "tESt 01"

Step 3. Once "tESt 01" is shown, let go of reset button and the IC

(Instrument Cluster) will go through

some test cycles. Numbers will be shown and here's what they mean:

1st display: BMW PART NUMBER (6 digits)

2nd display: CODE NUMBER (5 digits) Internal Coding Plug #

3rd display: K NUMBER (4 digits)

4th display: CHASSIS NUMBER (5 digits) this is part of your VIN

5th display: SOFTWARE VERSION (3 digits)

6th display: REVISION INDEX (2 digits) Hardware #

After all 6 displays are finished, an analog gauge test will be performed.

The self-test is canceled by switching the ignition off or to KL-15 (ignition

switch position 2)

IC (instrument cluster) tests 1-15

1995 - 1998 (99) 318ti

1996 - 2000? Z3

1997 - 1999 E36 4dr/coupe/convertible/M3

NOTE:

*Test functions 1-4 are unlocked tests and can be called up at any time for

display.

*Test functions 5-14 are locked and require unlocking the test mode before

they can be displayed.

*Test functions 2-14 can be selected at any time when the cluster is

unlocked, even when vehicle is moving.

*Test function 15 is the lock/unlock function.

Step 1: Press and hold the mileage reset button.

Step 2: Put key into ignition switch and turn to KLR (Ignition switch

position #1)

Your LCD display will show something like this "tESt 01"

Step 3: You will need to unlock the test function first so when the LCD

Display shows "tESt 01," press the reset button till you get to "tESt 15."

Once you're on test 15 press, and hold the reset button for a few seconds

until it displays "off." Now you can cycle through the test features. Here

they are as they follow:

Test 1: Instrument self test

Test 2: Engine Data - This display is an "engine factor" value that is stored

in the coding plug. The instrument cluster processor uses this factor in

addition to the "TD" signal from the DME control module to process and

display tachometer RPM based on the engine installed. For EXAMPLE:

*ENGINE FACTOR 2 = 4 CYLINDER

*ENGINE FACTOR 3 = 6 CYLINDER

*ENGINE FACTOR 4 = 8 CYLINDER

Test 3: SI elapsed distance - the total mileage in kilometer since the last

reset. Which service is due at the next inspection (OIL SERVICE or INSPECTION)

Test 4: SI elapsed days - no value for US vehicles. Relates to Euro annual

inspections.

Test 5: SI evaluation factor - for engine speed and temp. thresholds being

passed.

Display: n = 0 or 1. Engine speed (over-rev)

t = 0 or 1. Engine temp.

NOTE: "n0" means that you hit the maximum threshold for engine speed and "t1"

means you overheated the engine. I found out from my instructor that this

test 5 is false due to software related problems.

Test 6: Fuel Level and coolant temp. - Display of hexadecimal codes in

relation to gauge position.

Fuel gauge ----> Hex value

A (empty)---------> 0d

End of reserve---> 37

B-------------------> 54

C-------------------> 90

D------------------> c4

E (full)-----------> f0

Engine temp. ----- Hex Value

A----------------------> ce

B----------------------> 6d

C----------------------> 5c

D (center)----------> 4f-23

E-----------------------> 1e

F-----------------------> 18

Test 7: Engine speed (Digital Tach)- display of current engine speed

Test 8: Road speed - display of current road speed in km/h

Test 9 Distance reading - this allows the total stored mileage to be updated

if one of the storage components has to be replaced. This test step will be

used if the manipulation dot is illuminated in the cluster display. This

display will show the component with the lower mileage. For example:

Display of 012654 l indicates that the mileage in the internal EEPROM is

lower than the mileage stored in the coding plug.

Display of 000325 E indicates that the mileage in external coding plug is

lower then the total mileage stored in the internal EEPROM.

Pressing the reset button for 4 seconds will over write the lower mileage

with the higher mileage and cancel the manipulation dot. The SI data will

also be transferred at the same time.

Test 10: Status bits (input signals) - the status of digital inputs to the

cluster are displayed as 0 or 1.

Display: 0 = input low, 1 = input high.

_ _ _ _ _ _ <--- Mileage display...6 digits left to right

1st - belt contact, seat belt fastened = 0

2nd - ignition lock contact, key inserted = 0

3rd - door contact, door open = 0

4th - clock button pressed = 0

5th - SI reset = 0, for reset = 0

6th - EGS transmission failure = 0

Test 11: Status Bits (output signals) - the status of digital outputs is

displayed.

Display: 0 = output inactive, 1 = output active

_ _ _ _ _ _ <--- Mileage display...6 digits left to right

1st - Gong output

2nd - Brake warning lamp

3rd - Low fuel warning lamp

4th - EGA lamp

5th - seat belt lamp

6th - manipulation dot

Test 12: not used

Test 13: Country code of cluster - the display indicates the country version

of the cluster. This cannot be

changed in the workshop. Display: USA 02

Test 14: Software Reset - The reset must be carried out if any faults are

present that are not plausible before any components are replaced. After the

reset, the system will exit the TEST mode and the lock

will be reactived.

[Obi1 0]

Gadafi, care, pretece me.. Inace lepo pise da je prve cifra bmw part number, sto bi trebalo da znaci kataloski broj kilometar sata ili compa koji ovaj test odradjuje. Kod nekog pored stoji ''km'' tako da deluje zbunjujuce. A tom ''majstoru'' sto ti je rekao da je to stvarna kilometraza, kazi da se drzi kanala i pranja ruku uljem, najbolje onim od 50000km.. 375044 je prvi broj na 318is i na 316i , toliko..

[leon63 0]

[Gadafi veliko hvala. Jer neki samozvani strucnjaci ( citaj ljubomorni ), mi tvrde da je auto tolliko presao,( kod mene je prvi broj 363748) pa da je onda resetovana kilometraza ili smanjena. Veliko hvala i pozdrav.

[srlebmw 0]

Ma to su sve veliki majstori,kad ih čujem kako se gleda prava pređena kilometraža samo se kiselo nasmejem i više mu ne teram auto!!!

[BMW E36 POWER 0]

i ja jednom dosao do ''majstora" samo ulje i filter da promjenim...udje on u auto,sav ponosan ispritiska na brzinu(mislio da ja ne znam za to)i poce odbrojavati a prva cifra blizu 400 000 kad on skoci!!!vidi koliko ti je auto preslo,baci me covijek na sprdnju....ubi me...