Alpina 0 Posted April 16, 2008 Report Share Posted April 16, 2008 kako se resetuje kompjuter na E46,znam da ima veze sa kontakt bravom i dugmetom lock na kljucu... Link to post Share on other sites
siofor 0 Posted May 10, 2008 Report Share Posted May 10, 2008 brate, za to se moras obratiti profesionalcu, nemoj sam da petljas. Link to post Share on other sites
Alpina 0 Posted May 11, 2008 Author Report Share Posted May 11, 2008 ma ima neka fora sa kontakt bravom i kljucem, koliko puta sta se klikne...zna li neko? Link to post Share on other sites
GYLE 0 Posted May 30, 2008 Report Share Posted May 30, 2008 Ignition key must be off. Press and hold the trip odometer button in the instrument cluster (left button) and turn the ignition key to the first position. Keep the button pressed for approx. 5 seconds until one of the following words appear in the display: "Oil Change" or "Inspection" with "Reset". Release the reset button and press and hold again the "Reset " begins to flash. While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval, the following will appear: "End SIA". The system can only be reset again after 10 liters of fuel have been consumed. Ako imas problema sa prevodom javi pa cu prevesati. Inace funkcionise, bas probano na e46, 2001. POZDRAV Link to post Share on other sites
Alpina 0 Posted May 31, 2008 Author Report Share Posted May 31, 2008 Gyle, hvala ti za ovo, bice korisno naravno, ali ono sto ja trazim nema veze sa tasterima na instrument tabli, nego kljuc ubacis u kontakt bravu, tri puta vrtis do III, pa onda izvadis kljuc, sacekas par sekundi i pritisnes na kljucu dugme za otkljucavanje ne znam koliko puta, i onda se cuje neko caktanje. Posle toga sve radi perfektno, a ako se popale lampice bezveze, onda se posle ovoga ugase...JEste da je ovo napisano s brda, s dola, ali ko zna za ovo - znace da napise kako se to radi tacno...ja to samo po secanju iz servisa Link to post Share on other sites
Recommended Posts